Every home owner is advised to renovate his bathroom at least after every ten years. This not only helps to make the most of your bathroom fixtures but also adds value to the property. If you have been living in the same house for over ten years, you need to consider replacing your old toilets with low flush toilets.
These water-saving toilets can help you save money on utility bills while preserving water. The low flush toilets are easy to use and they have a modern design that allows your bathroom to look more attractive.
How do you save money on low flush toilets?
There are several commercials that urge members of the public to stop water wastage by turning off taps when not in use. For example, you don’t need to leave the tap running while brushing your teeth. In this case, the older toilets used up to 7 gallons of water with every flush but water-saving toilets only consume 1.3 gallons of water per flush. This means that you save up to 60-80% on water bills.
Do these toilets have enough momentum?
You are probably wondering how such less water can have enough momentum to get some jobs done. You need to understand that water-saving toilets are designed with dual flush mechanisms. The dual flush toilets offer two flushing options. One is designed for a low flush and the other one is designed for a more powerful flush. So you don’t have to flush twice to get the job done.
Other benefits of water-saving toilets
How can you tell whether or not you have a low flush toilet?
It is a common misconception that all modern toilets are water-saving. This is not particularly the case. Most old toilets were installed earlier than 1992 which means if you have a toilet that is more than 35 years old it’s time to switch to water-saving toilets. If you are not sure whether your toilets are water-saving or not, you can have a plumber evaluate your current toilet. If your current toilet is not low flush, look for a bathroom design showroom and order a water-saving toilet.
How much water do you save using low flush toilets?
Research shows that an average family of four uses up to 30% of water in their toilets every month. When you install water-saving toilets in your home, you save up to 14,000 gallons of water every year. This not only saves you tones of money but you also get to conserve the environment. Homes installed with low flush toilets have a modern look and feel and this helps to increase the property value.
As you can see, investing in water-saving toilets is a win-win situation and an investment that is guaranteed to give back handsome returns. Talk to a plumber and find out more what you need to do before installing water-saving toilets.
Are you having trouble with your bath tub? If that is the case, you are not alone. Most people complain about hot water issues. While some people get hot water from their tubs without issues, others experiencing problems. It can be disappointing to open your bath tub tap for hot water only to get cold water. Luckily, there are solutions that can help you get to the roof of the problem. You do not have to look far from the issue, which mostly revolves around the faucet. A buildup of minerals can easily block the valve making it hard to get hot water. Here is more on the valve issues.
You should not always suspect mineral buildup in the faucet as the culprit. There are other things that you could look at to determine the problem. That is why you need to know a thing or two about the temperature regulator. There is a temperature regulator on every single-handle tub faucet. Get a screwdriver and remove the handle. You will notice a plastic disk mounted on the faucet stem. This disk prevents the faucet from turning to the extreme hot side. Once you have removed the faucet handle, you can pull off the disk and rotate it slightly (by a few notches) to allow temperature increase. The disk can be rotated either clockwise or anticlockwise depending on the model.
In some cases, hot water problems usually develop over time. You may realize that for the past several months, your faucet has not been functioning effectively. Hard water is usually the culprit when you develop faucet problems over time. It is merely water with very high content of minerals. The faucet has small openings in its valves that easily get clogged by mineral deposits. Once the openings have been blocked, they restrict water flow and give out only cold water. In fact, they do not have to restrict water flow. They can affect the movement of the faucet and prevent it from reaching the hot side.
To get a clear glimpse of the faucet valve, remove the faucet from the bathtub. You will have to remove the handle first and then use a screwdriver to unscrew the retaining nut. In some cases, you may find a pin that has to be pulled to release the valve. The valve is usually kept in a housing. You should be able get it out of the housing easily with the help of a pliers. You can also remove it by reattaching its handle and pulling. If you are unable to do it, it is a clear indication that you have large deposits of mineral on the valve. You may have to get a valve puller from stores that offer all kinds of bathroom fixtures. This will help you to remove the valve and fix the issue.
Minerals can clog the valve cartridge over time especially if there is high exposure to hard water. If this is the case, you will have to get a replacement. However, if your valve is not in a bad shape, simple cleaning can restore its functionality. Immerse the valve in vinegar and leave it overnight. This really works when you are unable to see mineral deposits on the valve. You should clean the valve seat as well. You need a seat wrench to remove it for cleaning. For the obvious deposits, use a screwdriver for cleaning. Soaking the vinegar overnight can help remove deposits that cannot be removed by the screwdriver.
If you ever experience hot water problems in your bath tub, you should always check the faucet. If the problem is beyond the faucet, you will have to hire a professional.
Bathrooms require your utmost attention. Every detail matters. You would not want to miss out on anything. After all, the devil is in the details. That said, you can plan for a great bathroom enclosure installation. The thought of planning will sound daunting because you do not know much about bathroom enclosures. The good news is that you do not need to be an expert to plan. You simply need ideas to guide through the entire process and you will be able to create one. With a great plan, you can make all your wishes come true.
Check your bath tub
The success of your shower enclosure project depends on the bath. Getting the balance right has never been more important when it comes to a shower enclosure. This is particularly critical when your bathroom is small. That means that if you choose to have a free standing shower, a bathroom enclosure is not going to be an ideal option. On the flipside, you may have a bathroom that is nicely tucked into the corner. This is a good indication that you can open up the shower and add an aesthetic appeal. If you would like to have both your bath tub and shower enclosure combined, then you may consider requesting for a shower bath when hiring experts for shower enclosures in Oshawa. It is an ideal option for small bathrooms.
Switching to contemporary
The traditional arrangement for your bathroom usually has the bath tub tucked into a corner. You can change things a bit by choosing a different location for the shower. For instance, you can make use of the space along your bathroom wall by installing a walk in shower. This will not only give the space a real feeling but also make it look better. In case you do not have a bathtub, you can still make the space look elegant by installing walk in shower enclosures. Most corner cubicles do not get that elegant look without a walk in shower enclosure. The best part is that you do not feel limited in a small space. A walk in shower enclosure offers sufficient space to keep your conditioners, shampoos and shower gels.
Working on the door
There is a wide variety of styles to choose from when you want a want great door. You need to know what really works for your bathroom prior to visiting stores for bathroom remodeling products. This means making an early decision to ensure everything works out perfectly. More often than not, people make choices based on space and aesthetics. Some people prefer beauty over space while other prefer things the other way round. In light of that, hinged doors coupled with frameless enclosures look amazing. They allow you to have big panes of glass installed without any barriers. The only setback is that you are going to require more space.
Working with limited space
When working with limited space, you may consider having a different design. A bifold design is one of the options that works great if you have limited space. Sliding doors are ideal for a bigger space. As for pivot doors, you will definitely require a smaller space. However, it swings open when you want to get into the shower enclosure.
When planning to install a bathroom enclosure, you need to determine the amount of space available. With space, you can pick out a number of options that will transform your bathroom. You also need to be clear on the kind of style that you would prefer for your bathroom. If you want a contemporary style, your best bet is making a great plan and hiring professionals for the job.
When it comes to bathroom remodeling, size really matters. If you make a small mistake, you may end up disappointed with the final outcome. It is obviously easy to worry about the aesthetic appeal of your bathroom when replacing bathroom vanity. However, you should pay more attention to size to ensure that nothing is off in terms of size. You do not want bathroom vanities with lengths or heights that make washing hands or face very uncomfortable. Neither do you want a bathroom vanity that is too wide to fit. Here are great tips to help you get the right size for your bathroom vanity in Toronto.
The first thing to do before heading out to the stores is determining the location of plumbing. Once you figure that out, you will be able to know how the current plumbing can work with the new vanity. Some people typically forget about it and end up with the wrong sizes. Finding the plumbing area allows you to see the amount of space that you have available for the remodeling project. It gives you a clear idea on the openness and wideness of a space. In addition, you should take note of special prohibitions that limit how you install your new vanity. A good understanding of the bathroom layout is critical for bathroom renovations.
Width of vanity
The surest way to tell whether a bathroom vanity is ideal for the remodeling project is checking its width. There are various types of vanities from double vanities to single vanities. While a single vanity will work greatly in a bathroom with little space, it will absolutely look ridiculous in a spacious bathroom. In that case, you have to take measurements. Remember to measure the vanity counter top for precise data. Use your current plumbing as a marker to determine whether the vanity is going to fit perfectly.
For most single vanities, width ranges from 35-48 inches. That means that if you have a small bathroom, you will definitely do well with a single vanity. It is the best bet because it not only fits into your bathroom but also adds an aesthetic appeal. In some cases, you may want to create double vanity look but you have little space. An ideal thing to do would be getting two single bathroom vanities and placing them side by side. This will give you the look of a double vanity. If your bathroom is really small, you should opt for hanging vanities. That will make your bathroom look great without using too much space.
Unlike single vanities, double vanities are larger and take much space. Their width ranges from 60 – 75 inches. If you have a larger counter space, you can comfortably settle for a large vanity. Therefore, it is important to always ensure that you have enough space before getting any double vanity.
Height of vanity
Once you have the right figures for width, all you need to do now is focus on the height. You want to ensure that the height you choose is convenient for everyday use. Vanities that are either too high or too low come with a number of setbacks. Moreover, they are very uncomfortable to use. To that extent, vanity height needs to vary depending on space. This ensures that the people who are going to use it more often will be comfortable with it.
You will not go wrong with the size of bathroom vanity when you consider width, height, type of vanity and amount of space available in your bathroom. Once you have it right with size, you can get professional help for the best bathroom vanity installation.
A glass door is one of the amazing features of the bathroom that not only makes it look great but also adds space. If you are planning to install a glass shower in your door, you will need a few ideas to make the project successful. You can always hire a professional if you do not know anything about installation. It will save you both time and money.
For people with a bit of knowledge on construction and renovation projects, the right materials are vital for a successful project. Here are steps to guide you on glass door installation.
Stage 1: Getting the right measurements
First, you need to get the right measurements. Some bathrooms have both bathtub and shower heads. Most bathtubs actually have a standard size bathtub. This means that you can determine accurate measurements for the glass door.
After getting the right measurements, you can get to work with the help of a normal tub kit. Pick a style of choice and go through the box manual. It will help you to determine if the adjustments will perfectly fit into the opening of your bathtub.
Stage 2: Cutting door tracks
You will need a good hacksaw to cut the door tracks. Note that this may not be necessary because you may find with door tracks that fit perfectly into the bathtub opening in some cases. If the door tracks do not fit, you can go ahead and cut them to readjust their size for proper fitting. A chop saw is also a good alternative for cutting the door tracks.
After cutting the door tracks, you should clean the tub surround thoroughly. Dry it and install the bottom track. You will need a bead of silicone so you can run it along the edge of the tub and successfully install the bottom rack.
Stage 3: Drilling holes
You will have to drill holes during the installation project. First, you will have to hold the side track levels firmly so you can determine the ideal places for drilling holes. After marking the position for drilling the holes, you can remove the side tracks. The next step is drilling the holes in such a way that will fit the anchors.
Do not rush this process to avoid improper drilling. Once you are done with drilling, you will need the silicone bead again. This time you should run them down the center of the side tracks you purchased alongside other bathroom fixtures in Oshawa for renovation. Screw the side tracks in place after running the silicone bead. Next, work on the top track by cutting it to fit and set it on the side tracks. The side tracks should be properly screwed for firmness.
Stage 4: Getting doors
At this point, you will need a door to hang from the top track. The doors have rollers. Ensure that these rollers get into the grooves perfectly to allow the door to slide freely when the project is finished. Next, install the door handles. As you wrap up the project, it is important to ensure that both the sides and bottom of the door frame are properly caulked. You should leave it for at least 10 hours to allow the caulk to settle perfectly. You can now enjoy your bathroom with an amazing glass door.
When installing a glass door for your shower, you should pay attention to every detail. These steps highlight some of the areas that need utmost caution. You can install a bathroom shower door if you have the time and resources. You can also choose to hire an expert to do the project for you. The good thing about hiring professionals is that they come with a wealth of experience and plenty of ideas. They can recommend the best designs for your bathroom glass door and transform the space.
Don't get us wrong; it is perfectly alright to have certain things in your house looking small. A guest bathroom is one of the least things that should bother you as far as space is concerned. However, if things are not looking good in your master bathroom, you are likely to be inconvenienced in one way or another. Every morning when you wake up, you want to enjoy the functionality of your bathroom.
The same applies after a long day of hard work. This means that having a small bathroom can actually be a problem. If you have a small bathroom, do not lose heart because you can the way things look. Here is a look at simple ideas that will transform your bathroom.
Keep the tone consistent
Consistency is a factor that makes a bigger difference. A good example is sticking to a particular color. If you choose to have bright colors, do not have a significant part of the bathroom covered in a dark color.
For instance, if your tiles are light, you should not paint the bathroom walls dark. Why? It is going to eat up the available space visually and the result will be a bathroom that looks small. The good news is that you can achieve contrast if you want to by opting for something else. You can add a certain object such as a light fixture in the bathroom. This will definitely stand out as an amazing feature and add space.
Matching wall and ceiling color
There are some bathrooms with oddly shaped ceilings. Other bathroom ceilings actually appear angled. These unusual shapes have a way of making your bathroom look small. Luckily, all you have to do is paint both the bathroom walls and ceiling in the same color. A uniform color is effective for making these odd shapes disappear leaving the bathroom looking bigger. They eat up intersection planes and minimize transition numbers to create more space. You can vary the colors by only a shade.
Tile and wall color
Another effective way of doubling up the space in your bathroom is by focusing on the tiles and wall color. Contrasting colors cut your bathroom space making it seem like it has been split into two. When picking a tile color, find an option that will perfectly compliment your bathroom walls. If you have already installed tiles, you may want to repaint your bathroom walls.
Working on transitions
It is essential to keep a certain feature bleeding consistently around the bathroom area. For instance, if you have marble tiles on a single section of your bathroom walls, you will be able to create more space by ensuring all the sections of the bathroom walls are covered in marble tiles. The same applies to flooring. Keep it running consistently all over your bathroom including the shower itself.
Get more lighting
Your bathroom will look amazing and spacious with natural light. Therefore, light is something that you should definitely chase. Some bathrooms have shutter coverings. Others have blacked-out coverings in the bathroom windows, which obstruct light. In as much as privacy is essential, all these approaches simply wall up your bathroom windows and block light. You can get privacy and natural light by choosing the best stained-glass window in bathroom showrooms and hiring an expert for installation.
In some cases, you may find a bathroom without windows. Well, you can settle for other effective options that can still make your bathroom look brighter. A solatube is one of the features that can help you out with the lighting problem. All these simple ideas can make your bathroom look spacious. Keep in mind that you will need professional help when handling certain bathroom renovation projects.
Both your body and mind need the ambience of a spa after a long day. While some people may have the luxury to go to the spa almost every day, certain factors may make it hard for you to go the spa. Change in weather is one of the factors that makes people prefer to stay in the warmth of their homes rather than make the pricey trip. If anything, this should not keep you from enjoying the company of your home. You can simply turn your bathroom into a lovely sanctuary. Here are great tips that are not just pocket-friendly but also effective for transforming your bathroom.
Work on the visual appeal
How do you set the tone that gives your bathroom the vibe of a spa? Well, everything lies on the visual appeal of your bathroom. If you have ever taken time to observe different spas, you will realize that one element seemingly stands out in almost each one of them. When you come to think of it, you can also make your bathroom spa-like by embracing the minimalist concept.
It is a sure way to give your bathroom a restful, luxurious and serene feel. You can work on the visual appeal by using nature-inspired hues. Brown, green and grey colors are great options as they offer a calming organic feel. Lighter colors are also recommendable.
With great technology, you can enjoy the late night romantic feeling in your bathroom by getting recessed lights for your bathroom ceiling. These lights are actually accompanied with dimmer controls. The controls allow you to soften the lights and create the ambience of a spa. As you relax in the bathtub soaking gently, it is going to feel like bliss. However, you should note that fixing dimmer lights is quite a task and as such, you will require the help of a professional for great bathroom renovations.
Adding warmth with wood
Wood flooring is all you need to create a warm feeling in your bathroom. Sadly enough, it is not the ideal choice for damp areas. But all is not lost because there is a better alternative that can give you just about the same results. Thanks to technology, you can now install faux wood tiles and get the feeling that comes with the texture of natural wood.
This is because faux wood tiles imitate the look of natural wood. Moreover, they are highly resistant to water and durable. They have a wide variety of patterns that allow you to find an option that simply fits your décor.
Get a massage shower head
It is definitely true that most homeowners believe that a bathtub is a necessary element in the bathroom to create a spa-like environment. Yet, higher chances are that you will use the bathroom in fewer occasions than you may imagine. Furthermore, it can really eat up space if you have a small bathroom.
A bathtub is not a bad idea at all. However, you can still give your bathroom a spa vibe with or without it. A massage shower head is an ideal option that does not require extra space. Better yet, you can use it daily. If you have a spacious bathroom, you can have both a massage shower head and a bathtub installed. If your budget sort of limits your choices, then you can opt for the massage shower head.
After a warm shower or a nice hot bath, you would not want to wrap your body in a cold towel. Simply indulge in warm towels that will make your body feel great after a long nice bath. This explains the increasing popularity of towel warmers. They are really amazing especially when you need a late night warm bath.
If you are serious about making your bathroom as appealing as possible, chances are that you spent some time to find the perfect cabinets and other fixtures for it. It would therefore be a shame if the cabinets ended up lasting a very short time due to various issues such as moisture or overloading. To prevent this, you should pay attention to several factors which affect the longevity of bathroom cabinets. Optimizing these factors will ensure that you don’t have to spend money too soon to repair the cabinets. Some of the most important of these include:
Make sure that they are waterproof
It is an obvious fact that the environment in the bathroom is humid most of the time. Cabinets that you choose to install in the bathroom should be made out of a material that can resist damage due to humidity and water, since there is a risk that water may splash on them. Most wooden cabinets cannot withstand this environment without pre-treatment to make them resistant to damage by water.
Wood that has not been treated will end up warping, and in some cases may even rot. If you are insistent on having wooden cabinets in the bathroom, getting ones made out of bamboo is a good idea, since it can handle humidity in the long term without changing its size.
Make it a habit to clean the cabinets
Whatever the bathroom cabinets in Oshawa are made of, ensuring that they are cleaned on a regular basis will ensure that they last long. The cleaning process depends on the material used to make the cabinets, so you should get this information beforehand. In the case of bamboo, you only need water and a piece of cloth to clean it. For other cabinet materials, you may need to use harsher materials particularly if you need to get rid of stubborn stains. Regular cleaning of bathroom cabinets keeps them looking new, and also prevents them from degrading quickly.
Choose durable materials
Whether the bathroom cabinets are made to order or you decide to buy ready-made ones, always insist that they are made of durable material. This is the most important factor determining the longevity of the bathroom cabinets, and so should not be taken for granted. Polished metals such as brushed aluminum and bamboo are just some of the materials which not only look amazing, but which also last long. Of course, you should also make sure that the cabinet material matches with the bathroom design.
Know your weight limits
A common reason why bathroom cabinets get damaged quickly is because they are loaded with items that are too heavy for the cabinet. To prevent this, you should try to come up with an idea of what items you will store in the cabinet, and what they will weigh when full. Once you have this in mind, you can then buy a bathroom cabinet that has a weight rating that is slightly higher than the figure you came up with. Even if you fill it to the brim, you will be sure that it will hold.
The installation process
You may have a bathroom cabinet that can support the weight of the items you put in it, but if it is not installed properly then chances are it will fail. This is particularly so when it comes to cabinets that are bolted to the wall rather than the free-standing ones. Consider getting a professional to install the cabinet since this way, you will be sure that all the contact points will be able to support the weight of the cabinet and its contents.
Vinpow Bath Centre offers the best selection of bathroom vanities and other bathroom fixtures. Whether your bathroom is going modern or traditional, our modern bathroom vanities, traditional bathroom vanities, faucets, shower enclosures, shower panels, bathtubs, mosaics, toilets, tiles and bathroom accessories, are available at discounted prices. Having served the Greater Toronto Area (GTA) and its nearby cities for about 10 years, Vinpow Bath Centre is known as one of the bathroom solution providers. We have showrooms in Markham, Oshawa and Mississauga. Welcome to visit our showrooms! Our professional customer service staff are here to provide you the best services and suggestions.